ZHENGYANG MACHINERY EQUIPMENT Co.,Ltd.

       

Tire Recycling Line

Semi-Automatic Tire Recycling Line

  • Product Introduction:

Semi-Automatic Tire Recycling Machine is that separate the inner steel wire and fibre from waste tire through all kinds of technology and granulate the rubber block into powder. Waste tire treatment equipment is suitable to international development and management way. It merit on that can recovery the waste tire to rubber reaching to the availability 100% and use the rubber in recycle.

  • Introduction
  • Characteristics
  • Technical Data
  • Detail Images
  • Package
  • Semi-Automatic tyre recycling line

    Brief introduction:The resource of waste tyres are mainly from waste tyres, waste tyre tubes, waste rubber belt, waste rubber hose, and waste rubber overshoes, then from the waste products and leftover bits generated while manufacturing rubber products. It belongs to one large categories of industry solid waste. In order to protect the environment and reduce the waste rubber pollution to environment, realizing the recycling and reusing of waste rubber, especially waste tyres is of great necessity. Carrying out the recycyling and reusing of waste tyres is the effective waynof changing waste to treasure, disadvantage to advantage, avoiding the wasterubber pollution to environment; is the method of developing economy to make waste rubber to be recycled and reused; is the base of fulfilling International Environmental Conventions and Agreements and doing environment good foreign affairs.Presently, waste tire recycling equipment provided by our domestic competitors usually can produce 20-40 mesh rubber powder under normal temperature. However, low capacity and overusing of energy generate huge cost on production. Developed countries, such as Canada, a dopt liquid nitrogen freezing technique to freeze used tires at temperature of -180°C~160°C, then smash them with hammer-crusher or roller-crusher to make the steel wire and fibers apart from broken rubber blocks quickly. This technique requires too much liquid nitrogen and is too costly.
    Technical Parameters and Description of Each Part
    1.   CIRCULAR CUTTER(Circular cutter)
    It is applied to cut the tyre into tyre crown and tyre side.

     Circular cutter

    CIRCULAR CUTTER(Circular cutter)
     
    Motor power
    Tyre sizes
    Production capacity
    Figure Dimension
    Gross weight
    3Kw
    750-1200mm
    25-30 Tyres/Hr
    1150×850×1200mm
    500kg

     2. CABLE POUNDER(cable pounder)

    This machine is used to separate the wire cable from rubbers.
     
     
    CABLE POUNDER(cable pounder)
    Motor power
    Production capacity
    Machine size
    Machine weight
    11Kw
    1 tyre/Min
    1500×1100×1200
    1 ton

     3.SLITTER(slitter

    This machine is used to cut the whole tire,rubber pieces,rubber board into rubber bars.

    SLITTER(slitter)

    Motor power
    Production capacity
    Tyre size
    Size of the bars
    Machine size
    Weight
    4Kw
    20 Tyres/Hr
    ≤1200mm
    35-55mm
    1230×650×1580mm
    800kg

     4.DICER(dicer)

    This machine is used to cut strips (sticks) into dices (lumps).
    DICER(dicer)
    Motor power
    Production capacity
    Size of the lumps
    Machine size
    Machine weight
    7.5Kw
    0.8-1 Ton/Hr
    35×35×35
    780×550×1210
    600kg

    The tire rubber powder using range

    1. Pave the sport ground
    2. Motor industry
    3. Architecture & equipment
    4. Built & asphalt application
    5. Product rebirth rubber
    6. Others application

    The rubber powder are widely used and almost covers all industrial fields. It can replace the material such as plastic and PVC, instead of nature rubber, be rebirth tires .It is used in sport runway and shoe soles, it also can be used to highway, air trip as well as third generation railway sleeper as modification asphalt and so on.
    The rubber powder are widely used and almost covers all industrial fields. It can replace the material such as plastic and PVC, instead of nature rubber, be rebirth tires .It is used in sport runway and shoe soles, it also can be used to highway, air trip as well as third generation railway sleeper as modification asphalt and so on.

    Market development prospect

    The means of recycling waste tire is that separate the inner steel wire and fibre from waste tire through all kinds of technology and granulate the rubber block into powder. Waste tire treatment equipment is suitable to international development and management way. It merit on that can recovery the waste tire to rubber reaching to the availability 100% and use the rubber in recycle. Owing to no second pollution in production process, it is really recycling rubber and long duration development. It is a future developing mould that emerge the protection environment and reuse resource through product rubber powder from waste tires.
    The rubber powder are widely used and hardly coverage all lines. It can replace the materials such as plastic and PVC, instead of nature rubber, is rebirth tires.
    It is used in sport runway and shoe sole. It sole can be used in highway, air trip as well as third generation railway sleeper as modification asphalt.

     


Get Price And Support:

Please Feel free to give your inquiry in the form below.We will reply you in 24 hours

Name:
Country:
Tel:
E-email:
Message: